    
 
  |
|
|
|
Hose Break Couplings
- Hose break couplings are designed to shear
& seal in the event of a vehicle driving off with the nozzle still
in the tank.
- A valve on each half of the sheared fitting
closes prevents leakage.
- HBRK.3 is certified to BS 7117. BRK.3A
& BRK.1A versions are for diesel only, not for use in flammable
areas. Threaded BSPF.
- Shears at 250lbs when force is applied
in a straight line.
- Use in conjunction with the short “pigtail”
hoses
- ZVA safety break swivels also available.
| Stk
Code |
Description |
| HBRK.3 |
3/4” BSPF
hose break coupling |
| BRK.3A |
3/4” BSPF
NOT for use on petrol |
| BRK.1A |
1” BSPF NOT for use
on petrol |
| HBRK.1 |
1” BSPF re-usable
for diesel |
|
|
|
Hose Couplings & Adaptors
| Stk
Code |
Description |
| QR.3M |
3/4” Quick
release M probe - F coupler |
| QR.3F |
3/4” Quick
release F probe - F coupler |
| RNP.3.3G |
3/4” M parallel cone
- 3/4” M taper |
| RNP.4.3G |
1” M taper - 3/4”
M parallel cone |
| NIP.3P |
3/4” BSP parallel
nipple |
| BSH.4.3A |
1” M x 3/4”
F alloy reducer bush, parallel |
| ENDGRV.3 |
3/4” brass hose tail |
| ENDGRV.1 |
1” brass hose tail |
| ENDGRV.15 |
11/2” brass hose tail |
| WD25/AZ |
Worm drive clip for 3/4”
& 1” tails |
| WD32/AZ |
Worm drive clip for 11/2”
tails |
| Wider
range available on request |
|
|
|
Hose Mast/Retriever
- Keeps excess hose off the ground, prolonging
hose life.
- Prevents safety hazards & hose kinking.
- A simple spring rewind lanyard that attaches
to the hose.
- Suitable for use with either 19mm or 25mm
bore hoses.
- Can be used with hoses up to 6 metres
long.
- Choose either floor or wall mounting versions.
- Long life braided nylon retractor cord.
- Floor mount version requires 11/2” riser
pipe.
| Stk
Code |
Description |
| HMAST.F |
Floor mount
retriever (excl. riser pipe) |
| HMAST.W |
Wall mount retriever |
|
|
